I Can Has Mail!

So I get home from work today and what’s there, but a box. I didn’t recognize the return address in New York. Was it a letter bomb? Anthrax? Nope, much better!

That’s a Dragon Leatherworks FlatJack Holster sent to me compliments of Dragon.

I suspect he got my address through Jay who named and reviewed this holster. His was for a S&W J-frame, mine is for a 1911. I gots a lot to say so here be the cut!

So first up there is no “Fresh-out-of-the-box” picture because I immediately donned my belt and dropped in my S&W1911Sc and took it for a spin. First my initial impressions. Its a sharp looking holster. It has a body made of black leather, with an insert of tan leather and genuine python skin. The stitching is very neat, and the leather is very stiff and tough.

Now as a disclaimer I’ll note that I’m not very knowledgeable on belt carry, as I tend to tote my 1911 in a Shoulder-thing and I generally don’t wear a belt. But Even with my ineptness I slapped on a belt, and put in my 1911.
I’m sure veteran belt-toters can point out some tips on how I can do it better, but I must say riding at 4:00 it tucks the gun in nicely but also rides very comfortably.

The pancake design is made for concealment, but I will say it rides lower than most of my shirts and cover coats, but a longer t-shirt or long vest or coat will cover it up, and the flat outside body blends the gun well with the curve of your hip. Still as I prefer to carry concealed in a shoulder rig I’ll leave well-enough alone and reserve this gun for open carry. As an open carry holster this fills a void in my collection, as I generally pocket carry which really can’t be “Opened”, or shoulder carry which I think looks cool open, but I also think my denim jacket looks REALLY cool. With the two-tone leather and the snake skin this holster really begs to be exposed. Coupled with my slick Chip Double-diamond slim grips I have a carry kit not to be covered up! Also the holster gives the gun a slight forward cant which makes for a VERY natural draw. Also the mouth is stiff enugh to allow one-handed re-holstering without muzzling your body. I’ve seen all the tactical guys do left-handed draws from 4:00, but the cant did make the holster want to retain the gun when drawn from that angle, but possible this could be fixed by wearing the gun slightly further back.

But lets talk about retention:
LOOK AT THAT!! That’s my Stainless 5″ 1911 (you’ll not the open-mouth design allows for Government and Commander 1911s to be used) with a loaded magazine being held up only by the strength of the leather!
Have a look at that scale readout. 2 pounds, 12 3/8th ounces! (44+ oz for those who read gun magazines!) That is not a light gun. I will also add that a few shakes would not dislodge it, tho some more vigorous agitations I’m sure could. Let’s just say the gun is going to stay where you put it, but still allow a smooth draw with a good belt. (I’ll note I was using an LL Bean leather belt that measures slightly over 1″, but the loops measure 1.75″ so much wider belts will fit).

This is a great holster, and I must thank Dragon for sending it my way. It looks great, and functions just as well.

If I had to complain I’d suggest something be done to make it ride a little higher so it would conceal better, and put an under-cut near where the grip meets the trigger guard to give a more positive grip on draw, but those are minor quips!

Now I need to find an open carry rally!!

This entry was posted in Guns, product review. Bookmark the permalink.

0 Responses to I Can Has Mail!

  1. Dragon says:

    I was wondering (being that I’m such a 1911 noob….) if the Commander would fit…evidently, it fits. ๐Ÿ™‚

    I love the look of the Commander in the holster…the colors compliment REAL well!

    So…..when is the next Tea Party rally in New Hampshire or Vermont? ๐Ÿ˜‰

  2. Pat says:

    Definitely need to get a real gun belt. I like mine so much I wear it even when I don’t need it to support my sidearm.

    I am an IWB person but Dragon does excellent work on the flatjack. I think the simplicity is what is so grat about it.

  3. NightPaws says:

    That’s totally gorgeous! I have wicked holster envy now. Considering open carry is pretty damn kosher around town, especially in the fall, I think I need to order one as soon as I know how much money I have/if I have money left from the medical bills! ๐Ÿ˜€ My Grand Raptor deserves something suitably fancy. Something as cool as that will earn the envy of all of the gun guys. I’d just HAVE to compete in a pistol match while rocking that. (And I don’t do competition. It makes me nervous.) On the other hand, I wonder if he’d do something in a leg holster or a belt holster fitting for the Desert Eagle. Ah obviously not something for CC (unless I had the full length duster on), but something to carry it during hunting season, and at the range for the hell of it. Laura Croft I am obviously not, but it would sure give me a thrill.

    I’m even going to have to show the guys at work how cool yours looks. They’re all a bunch of gun nuts and I have a feeling one or two might order something special. Dragon really has an eye for leather working. I love the contrast pieces he used in your holster, and the way the stitching acts as a “frame” to bring out the snake skin and red leather even more. Functional, yet artistically gorgeous all at the same time. That cut of snake skin is just stunning and keeps wowing me as I look at the pictures. I bet his work with stingray is just as awesome too. Quality leather work is one of my favorite things. ๐Ÿ™‚

    I totally dig your grips- I have a few of those on various paintball guns. They’re comfy and quite stylish. If I didn’t have those Carbon Creation grips that came with mine, I would have tossed a spare pair on. I hope you soon attend some sort of event to sport that beauty! I have a feeling you’ll get a lot of compliments.

  4. Pingback: Weer'd World ยป Mainers Unite!

  5. George says:

    That’s a gorgeous holster.

  6. Pat says:

    I got my belt when I got my first IWB. It came from tucker gun. He sells bullhide belts from the Beltman.
    http://www.thebeltman.net/

    I’ve heard good things about comptac and bullhide as well.

    A good quality double layer bull hide or top grain 1 1/4″ – 2″ made specifically to carry. Most lay the grain of the leather of the layers perpendicular for more rigidity. You can get them with velcro lining for IWB where clips don’t show, or with a kydex layer in the middle for even more rigidity.

  7. Linoge says:

    That is a pretty damned nice rig there! And you know how I like interesting skins… ๐Ÿ™‚

    I have found that 3:30 to 4:00 carry works pretty well for my rig, but it is also at a 15-ish degree cant, so it is a balance of comfort and security. As for belts, I rather like 5.11s lineup in that category – relatively affordable, and their Kydex-like stiffening works damned well.

  8. Pingback: Weer'd World ยป Help A Brother Out

  9. Pingback: dragon leatherworks flips the flatjack | walls of the city

  10. Pingback: Weer'd World ยป Nice Leather You Got There!

  11. Pingback: Weer'd World ยป Dragon Letherworks Talon

  12. Pingback: Weer'd World ยป “Coat Tax”

  13. Pingback: Hitting the Bigtime | Weer'd World

  14. Pingback: Evening Picture | Weer'd World

  15. Pingback: I Know that Guy | Weer'd World

  16. Pingback: New Products from Dragon Leatherworks | Weer'd World

Leave a Reply to George Cancel reply

Your email address will not be published. Required fields are marked *