As a general rule you use the term “Negligent Discharge” when an “oops” happens with a firearm. That isn’t always the case
I lock the slide open, pull the mag, shake out the round in the chamber and replace it in the magazine. Grab the slide, pull it back and release and *boom*. Gun goes off. Now, my finger was nowhere near the trigger when this thing went off. Bullet impacted the ground about five feet in front of me. (Because we always, always, always keep the muzzle in a safe direction NO MATTTER WHAT.) Now Im curious.I dump the mag, lock the slide back, and examine things closely. Amazingly, the firing pin is protruding from the bolt face with the slide locked back. I poke my finger in there and push on the exposed firing pin…no travel, the thing is frozen in place. Somehow the firing pin locked in the forward position and when I dropped the slide the gun slam-fired the next round. Unbelieveable. I have read of such things happening but never experienced it myself, and I’ve shot more guns than most people ever will. I gave the guy back his gun, pointed out the firing pin issue, and said “Do not load this gun. It *will* go off if you load it. Find the instructions and disassemble the slide and see why the firing pin is locked up in the forward position.”
Scary stuff! The gun was an AMT Automag in .45 Win Mag. A pretty serious heater. I’ve heard many horror stories of AMT quality control issues, and I’ve shot a fistfull of really sucky AMT guns. Who knows what’s wrong with this one, but its not safe to use until its fixed.
The Moral of this story is Always follow the 4 rules of gun safety whenever a firearm is in your hand
RULE I: ALL GUNS ARE ALWAYS LOADED
RULE II: NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT WILLING TO DESTROY
RULE III: KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
RULE IV: BE SURE OF YOUR TARGET
Not only do these rules keep you aware of negligent handling that can cause serious problems, but it also keeps things safe in the odd event that a gun malfunctions and discharges.
Another “common” (I say that because guns that fail in a way that the gun discharges is quite rare) is firing pin blocks getting worn and the gun discharging when the hammer is dropped by means of the decocker. The most common culprit of this I’ve read about is the CZ-52 Whenever you decock a firearm ALWAYS keep it pointed in a safe direction. Also if you carry a DA gun like the CZ-82/83 or a CZ-75 that doesn’t have a decocking lever (dunno why only CZs are coming to mind) it might be a good idea to have your “Safe direction” be a clearing barrel that way if your finger slips and the hammer falls with enough velocity to ignite the primer the round will quickly be captured by the sand or dirt in the barrel.
It actually doesn’t take a lot of sand to stop most rounds, and I actually like the way the CZ-82 is set up for carry, as you can engage the safety or lower the hammer, but not both which would be redundant in my book.
Just be safe people, it doesn’t take much effort if you keep your mind about it.