From Guav in LJ land…
5 Useless Gadgets that Solve Non-Existent Problems
Gotta love the dry “Solutions” given by the article!
From Guav in LJ land…
5 Useless Gadgets that Solve Non-Existent Problems
Gotta love the dry “Solutions” given by the article!
So in my last post a few people were talking about the dynamic of gun rights in America.
Now given that I’m in my early 30s, I was born into a world of rising popularity, and frankly just about everybody alive today has a similar view, just a question of how high they saw the rise.
But I think we’ll all note that this nation is in its early TWO HUNDRED AND THIRTIES, and our lifetimes are just a small chunk of that. What appears to be a ground-swell of support is actually just a tiny experiment being played out over the course of about 70 years. And as we can see, the experiment failed.
The anti-gun movement was one of lies and deceit, it took a while for the light to be shown on the fact that the laws they propose don’t do what they suggest they will, and the claims they make are untrue. And with that light the tide is turning, as its only natural for people to support human rights, and refute lies.
I’ll end this post with a quote:
Assault weapons’ menacing looks, coupled with the public’s confusion over fully-automatic machine guns versus semi-automatic assault weapons –anything that looks like a machine gun is assumed to be a machine gun– can only increase the chance of public support for restrictions on these weapons.
That’s Josh Sugarmann executive director and founder of the Violence Policy Center.
So a post by a famous troll on a less famous troll’s puss-filled weblog (No link, screw them!) This was stated as a course of action:
1. Deny gunloons what they most desire. Guns? Nope. Acceptance. What gunloons really want more than anything is an acceptance of their gunloonery as ‘normal’ or mainstream.
I see this tactic as more anti-gun projection. Generally we see it in the case that anti-rights people tend to have poor judgment, quick tempers, and are often violent.
This is something a little more sad. So Trolly wants to take away the mainstream acceptance of guns, self defense, and the second amendment. A tall order given our recent court victories, and the massive increase in gun sales, as well as the huge growth of female shooters as a demographic.
Meanwhile we have a handful of anti-rights bloggers (in this case its one troll using another’s blog as a soapbox!) and even less in the professonal side
Heck look at these pictures. In Picture one you have about a dozen anti-rights protesters (Breda added for scale) Now put this in prospective: I went behind the protesters and took a picture a dozen anti-rights people being watched like animals in a zoo by about 100 NRA members. There were overall over 70,000 people in that exact area for the NRA convention.
Even more so, except in isolated pockets of the country, our gun culture has been more-or-less uninterrupted since this nation was born (resisting among other things, gun control from the British Crown).
Tam has a great post over at the Arms Room:
Yep the whole idea of needing a pistol permit or some sort of training to carry a gun for personal protection was a bit of an absurdity not long ago…those times are again returning
I would point out that the anti-rights side is a small and shrinking lot full of people, many of whom are mentally ill who are terrified and hide from the truth and many are violent…and they talk about taking acceptance away from US?
More projection, as they are imagining what they would be like if they had acceptance.
They don’t, and frankly because of all their problems, they likely never will….
Got a Nice beat….dunno about the subject….
So we found some home invaders last night. Ants. Not fully sure what species they are:



I suspect they are Pharoh Ants tho the abdomens don’t seem to have the stripes, but that could just be because these fuckers are damn tiny and the BEST look I’ve had of them is the above images which were taken with my camera’s macro lens then cropped. Still the body morphology looks about right, especially with the segmented nation of the connection between the abdomen and thorax segments.
They don’t respond at all to cayenne pepper, and don’t seem to be interested in ant traps. We sprayed some stuff down that should collect on their bodies and poison the nest, but if that also doesn’t work, anybody have any idea if these are indeed pharaoh ants, and how best to deal with them?
Our next trick might be a mixture of sugar water and borax as another systemic poison that they’ll take home with them.
Oh and after Mrs. Weer’d freaking out about them (she does NOT like critters sharing domestic living space with her) I felt a strong urge to watch this on Netflix Instant View:
According to Hollywood of the 1950s Ants can be killed by judicious aplication of .45 ACP from a M1A1 Thompson
I might try that if the other stuff doesn’t work…
Funny story for today. I was playing a video game on the 3rd Floor when I heard a LOUD “BOOM”! Then all the power went out in the house. It sounded like explosive decompression, and I was horribly concerned that the compressor on one of our Air Conditioners had blown. Came down stairs and the Mrs. looked just as confused as I, so I ruled out the AC that she was sitting beside.
I looked outside and couldn’t see anything wrong with the world. No car accidents or crowds gathering, just a few people on their porches looking around.
The neighbors on one side of the house still had power, as their air conditioners were cranking away. I went over to the other neighbor and saw their son puttering around in the kitchen. I gave him a wave, and asked if he had power.
He had seen it all go down. It appears that a finch decided to land on the transformer and made herself into a little feathered resistor. You could see on the body where the charge had arced and blown a strip of feathers off of her and blew a sizable hole in her neck.
As you can tell by my typing the electric company showed up inside of an hour and very quickly changed the fuse on the transformer.
Was a neat little experience….well maybe not so much for the bird….
Thanks to Wally (How’d I know you’d offer the winning clue) I went to the manufactuer’s website:
According to my manual, The load I was using was clocking around 750 FPS. That’s pleasantly in the danger zone. Now for REALLY good news there is a Blue Dot load that boasts 810FPS, and a titegroup load that starts around there and maxes out at just over 900.
So I might play around with the blue dot load, but give titegroup the old college try when I get around to getting some of it!
Thanks Wally!
One more question before I go. People talk about seating wadcutters flush with the case mouth, does that make much of a difference with a revolver load? I’ve been loading mine with just a few mm of bullet sticking up above the case mouth, should I be seating them lower?
So here’s my dilemma. I came across a good deal on 1,000 148gr 0.357″ Wadcutter bullets. I already had powder and data for a VERY light .38 Special load using Lead bullets. Turns out these bullets are copper-coated. Doing some quick reading, and noting that the copper totally covers the lead I assumed they were plated, and just used a slightly warmer load for the lead data.
Needless to say I’ve had a BUNCH of squibs on this load. at first I thought I might be getting light charges, but you can hear the powder in the shells, and even screened shells would eventually squib. I suspect what I have are total metal jacket bullets. That’s not a problem as I like jacketed ammo for shooting better than lead as they make less of a mess, still I need a load that can overcome copper-fouling and not squib on me.
Was talking with Zercool about it this morning when complaining about my recent powder-screw-up. I found that hodgdon has data for Jacketed 146 gr FMJ bullets and the Tight-Group data for that looks promising. But Zercool mentioned that wadcutters, being flying soup-cans have a LOT more baring surface than a traditionally shaped bullet, so am I going to get myself into more trouble by adapting this load?
I found this forum thread that appears to be my same problem, but some of the loads they list aren’t in any of my manuals so I don’t know if I can trust those either.
Anybody able to point me in the right direction, or give me a rule of thumb how to adapt the FMJ bullet data to a JWC bullet load?
Thanks!
Spent Sunday Afternoon with family in Maine, and had lot of fun. On the way home I decided to stop by The Kittery Trading Post I wanted to pick up a pistol disassembly manual and some powder for a .38 Special load I want to work up, also I found some primers, so I cleaned them out.
They need to bring the powder up from someplace, so I did what I was going to do anyway, and browse the showroom. Of course I got to LOATHING Massachusetts as they had a used Kahr PM45 for $520. Wanted it SOO bad, but there is no legal way for me to buy it, so there it sits.
Finally I went to the check out, and I saw my powder sitting behind the register. I pointed it out to the kid behind the register, and started checking out. He put my stuff in a bag and stapled it shut….this is to prevent theft.
Then I drove home, and when I opened the bag there was the WRONG POWDER!
BOOOOO
Well now I have an excuse to go back to Kittery next weekend….still kinda rubs me the wrong way.
Robb Allen is a funny guy, and when reading his latest post I took a quick look around the armory and too this picture:
Clockwise from the top in a willy-nilly order we have a Video card and below it is a stick of RAM the came from some forgotten computer build, a 1911 Commander, a Damascus Knife with a stag handle, a Ka-Bar Pistol bayonet, a WD-40 pen, a Jenning J-22 that seems to be getting a lot of talk these days, and a novelty cow bell with stick.
Oh yeah in the middle? Well that’s the musical instrument I’m playing in Vicious Circle #58.
Yep Robb, that’s ALL your fault!!!
